Products

This diopter is compatible with all current Z-Finder models. If you purchased your Z-Finder over 4 years ago, contact sales@zacuto.com.

1" black male/female rod is lightweight; 15mm diameter and black anodizing. 

The Half Inch Adapter is the all in one adapter. It can screw into any Zacuto female rod. It adapts a Zacuto rod from 15mm to either a ¼” 20 or ⅜” ...

Replacement 1/4 20" screw for the following items: Zacuto Cages DSLR Baseplate

This camera lens support screws directly into the ¼ 20 screw hole that can be found under many different lenses and attaches in an upside-down T sh...

Replacement ¼” 20 screw for many Zacuto products including the following items: VCT Universal Baseplate (discontinued)ACT BaseplateVCT Pro Basepla...

Replacement 1/4 20 screw for the Zacuto Gorilla Plate V2. This version has a red lever at the front of the plate by the lens.

A custom 12" 2 pin to 4 pin LEMO & SDI cable for the Kameleon EVF PRO and RED RAPTOR XL   Please note the V Raptor does not come with a 2 pin L...

The Z-Lock 15mm is designed to attach rods at the top of cages for wireless follow focus motors. Please contact sales@zacuto.com if you need a Z-Lo...

The Right Angle Extension Cable allows you to extend the relocator cable of the Canon 18-80 or 70-200 lens grip an additional 6” from the lens. The...

2" black female/female rod extension. Female on both ends. 1 rod extension only. These rods are lightweight; 15mm diameter and black anodizing. The...

2" black male/female rod extension. Female on one end and male on the other. 1 rod extension only. These rods are lightweight; 15mm diameter and bl...

3" black female/female rod extension. Female on both ends. 1 rod extension only. These rods are lightweight; 15mm diameter and black anodizing. The...

The Zacuto 3 inch Z-Rail works with any of our Z-Rail accessories. It attaches via (2) ¼” 20 screws (included) that are spaced 3/8" screw center to...

3.5" black male/female rod extensions. Female on one end and male on the other. 1 rod extension only. These rods are lightweight; 15mm diameter and...

3.5mm AUX cable for the Sony FX6 camera grip. Cable is also included with the purchase of Sony Trigger Grips.

Replacement 3/8 16 screw for the VCT Universal Baseplate (discontinued), VCT Pro Baseplate, and ACT baseplate.  This screw is also used in Zacuto c...

A custom power video cable with power switch combining a BNC with a 4 pin Lemo Compatible to d-tap cable. This handy cable allows you to power the ...

A 12" custom power video cable with power switch combining a BNC with a 4 pin Lemo Compatible to powertap. This handy cable allows you to power the...

Zacuto has created a custom power video cable combining an HDMI cable with a 4 pin compatible to d-tap power cable with a power switch on the p-tap...

4.5" black female/female rod. Female on both ends. 1 rod only. These rods are lightweight; 15mm diameter and black anodizing. They are made out of ...

4.5" black male/female rod extension. Male on one end, female on the other. 1 rod only. These rods are lightweight; 15mm diameter and black anodizi...